MSRP $100.00
 |
|
[ACD-AMFM] Additional AM/FM Tuner Card for TU-604CI
- Adds additional AM and FM tuning capability for expanded whole-house systems
- RDS Radio Data System provides programming type and other station-specific data, including song name (when broadcast by the station)
- 56 stations memory
- Precision AM/FM digital tuning
- Threaded “F” connector for 75 ohm coaxial FM antenna connection
- 300 ohm balanced AM antenna input connector
|
|
MSRP $300.00
|
|
[ACD-HD] HD Radio Tuner Card for TU-604CI
- Adds HD Radio reception functionality
- Simple Plug-And-Play installation – slides into expansion slot
- Over 1500 HD Radio stations already on the air
- Over 700 HD Radio stations offer simulcasting of two or more programs
- HD Radio AM stations sound like FM
- HD Radio FM stations sound like CD
- No hiss, dropouts or reception noise
|
|
MSRP $100.00
|
|
[ACD-XMSIR] XM/Sirius Satellite Tuner Ready Card for TU-604CI
- Interface with external XM Satellite Radio or Sirius Satellite Radio tuners
- Simple Plug-And-Play installation – slides into expansion slot
- Over 170 XM Satellite Radio stations available
- Over 130 Sirius Satellite Radio stations available
- Clear, digital audio sound quality
- Add two ACD-XMSIR cards – one each for XM and Sirius
- XM and Sirius satellite radio are subscription-based services
|
|
MSRP $299.00
|
|
[RC-7000CI] IR/RF Programmable Remote Control
The RC-7000CI remote control offers fully programmable capabilities integrating both standard key and LCD display key technology maximizing performance, configuration and ease of use. Infrared (IR) and radio frequency (RF) signals allow for integration into almost any application. Line of sight is not required in RF mode allowing more flexibility when walls and obstacles are a problem. Denon codes are pre-programmed for quick setup. The RC-7000CI is 2-way communication ready when used with the RC-7001RCI base station supporting Meta-Data when used with '08 series AVR receivers with RS-232C serial ports.
|
|
MSRP $199.00
|
|
[RC-7001RCI] IR/RF Remote Base Station
The RC-7001RCI is the matching base station for the RC-7000CI remote control. A front IR blaster and four IR flasher outputs are provided for simple connection easy placement. A dedicated serial port provides 2-way communication with Denon '08 serial port equipped AVR models. Six IR flashers and a serial port dongle are included.
|
|
MSRP $299.00
|
|
[ASD-51W] ** NEW ** Denon iPod/Networking Client Dock with WiFi
- Connect and play your iPhone, iPod or Nano (audio & video)**
- Stereo audio outputs; S-video output to display iPod pictures and videos on your TV, with intuitive Graphical User Interface
- Connects to Dock Control port (provided on many Denon models)
- Choose tracks and favorites using your Denon component’s remote control
- Provides charging function
- Access Rhapsody and Napster online music services (subscription required)
- Digital coaxial audio output
- Access your PC’s music, photos and playlists via Windows Media Player 11
- Supports WMA, MP3, WAV, FLAC and non-DRM AAC audio files; JPEG photo files
**For more information about various iPod products compatibility with the ASD-51W dock, please download the Denon Docks iPod Compatibility Chart.
|
|
MSRP $249.00
|
|
[ASD-51N] ** NEW ** Denon iPod/Networking Client Dock
- Connect and play your iPhone, iPod or Nano (audio & video)**
- Stereo audio outputs; S-video output to display iPod pictures and videos on your TV, with intuitive Graphical User Interface
- Connects to Dock Control port (provided on many Denon models)
- Choose tracks and favorites using your Denon component’s remote control
- Provides charging function
- Access Rhapsody and Napster online music services (subscription required)
- Digital coaxial audio output
- Access your PC’s music, photos and playlists via Windows Media Player 11
- Supports WMA, MP3, WAV, FLAC and non-DRM AAC audio files; JPEG photo files
**For more information about various iPod products compatibility with the ASD-51N dock, please download the Denon Docks iPod Compatibility Chart.
|
|
MSRP $229.00
|
|
[ASD-3W] Denon iPod/Networking Client Dock with WiFi
- WiFi IEEE 802.11b/g certified
- DNLA certified
- PlaysForSure compliant
- iPod Nano 3G and iPod Classic video capable
- Internet radio capable without a PC when connected to a network either wired or wireless
- Multi language support
- GUI menu support
Denon Docks iPod Compatibility.
|
|
MSRP $179.00
|
|
[ASD-3N] Denon iPod/Networking Client Dock
- DNLA certified
- PlaysForSure compliant
- iPod Nano 3G and iPod Classic video capable
- Internet radio capable without a PC when connected to a network
- Multi language support
- GUI menu support
Denon Docks iPod Compatibility.
|
|
MSRP $99.99
|
|
[ASD-11R] Denon iPod Dock
- Connect and play your iPhone, iPod Classic, Touch, new Nano (audio & video)
- Stereo audio outputs; S-video output to display iPod pictures and videos on your TV
- Connects to Dock Control port (provided on many Denon models)
- Choose tracks and favorites using your Denon component’s remote control
- Provides charging function
- Elegant styling to match your iPod
- Cables and adapters for various iPod models included
Denon Docks iPod Compatibility.
|
|
MSRP $60.00
|
|
[AKP-100] iPod Cable
Optional 1 meter (3.2') proprietary iPod connection cable for the AVR-4306 and S-Series models.
Denon Docks iPod Compatibility.
|
|
MSRP $499.00
|
|
[AK-DL1] Ultra Premium Denon Link Cable
Denon 1.5 meter (59 in.) high definition Denon Link cable.
|
|
MSRP $100.00
|
|
[AK-HM100] Ultra High Quality HDMI Cable
Denon 1 meter (39 in.) HDMI 1080p certified cable.
|
|
MSRP $150.00
|
|
[AK-HM300] Ultra High Quality HDMI Cable
Denon 3 meter (118 in.) HDMI 1080p certified cable.
|
|
MSRP $200.00
|
|
[AK-HM500] Ultra High Quality HDMI Cable
Denon 5 meter (197 in.) HDMI 1080p certified cable.
|
|
MSRP $80.00
|
|
[SCABLE10M] Extension Cable
Optional 10 meter (32.75') extension cable for the S-101, S-102, S-301 and S-302 models providing for enhanced placement of the control and subwoofer units.
|
|
MSRP $60.00
|
|
[SCABLE6M] Extension Cable
Optional 6 meter (19.5') extension cable for the S-101, S-102, S-301 and S-302 models providing for custom placement of the control and subwoofer units.
|
|
MSRP $949.00
|
|
[DL-S1] Audiophile Moving Coil Cartridge
- Type: Moving coil (MC)
- Output: 0.15 mV
- Channel Balance: 1dB Max. (1kHz)
- Channel Separation: 28 dB Min. (1 kHz)
- Output Impedance: 40 ohms
- Suggested Loading: 100 ohms min.
- Stylus: 0.07 x 0.07 mm special elliptical tip
- Coil: Copper (6N) & solid gold
- Frequency Range: 20 Hz to 70 kHz
- Tracking Force: 1.3g ± 0.2g (1.1~1.5g)
- Compliance 14 x 10-6 cm/dyne
- Weight (Mass): 7.0g
|
|
MSRP $699.00
|
|
[DL-304] Audiophile Moving Coil Cartridge
- Type: Moving coil (MC)
- Output: 0.18 mV
- Channel Balance: 1dB Max. (1kHz)
- Channel Separation: 28 dB Min. (1 kHz)
- Output Impedance: 40 ohms
- Suggested Loading: 100 ohms min.
- Stylus: 0.07 x 0.1 mm special elliptical tip
- Frequency Range: 20 Hz to 70 kHz
- Tracking Force: 1.0~1.4g
- Compliance 14 x 10-6 cm/dyne
- Weight (Mass): 7.0g
|
|
MSRP $499.00
|
|
[DL-103SA] Limited Edition Moving Coil Cartridge
- Special limited edition of the legendary DL-103
- Type: Moving coil (MC)
- Output: 0.25 mV
- Channel Balance: 1dB Max. (1kHz)
- Channel Separation: 25 dB Min. (1 kHz)
- Output Impedance: 14 ohms
- Suggested Loading: 100 ohms min.
- Stylus: 0.2 mm square solid diamond with 16.5 microns round tip
- Body: Resonance-free glass fiber composite epoxy
- Coil: Ultra-pure 6 Nines (99.9999%) Oxygen Free Copper windings
- Frequency Range: 20 Hz to 45 kHz
- Tracking Force: 2.5g ± 0.3g (2.2~2.8g)
- Compliance: 5 x 10-3 m/N
- Weight (Mass): 9.7g
- Elegant walnut wood case with engraved serial number and inscribed engineer’s nameplate
|
|
MSRP $379.00
|
|
[DL-103R] Moving Coil Cartridge
- Type: Moving coil (MC)
- Output: 0.25 mV @ 1kHz
- Channel Balance: 1dB Max. (1kHz)
- Channel Separation: 25 dB Min. (1 kHz)
- Output Impedance: 14 ohms
- Suggested Loading: 100 ohms min.
- Stylus: 0.2 mm square solid diamond with 16.5 microns round tip
- Coil: Copper (6N)
- Frequency range: 20 Hz to 45 kHz
- Tracking Force: 2.5g ± 0.3g (2.3~2.8g)
- Compliance: 5 x 10-6 cm/dyne
- Weight (Mass): 8.5g
|
|
MSRP $329.00
|
|
[DL-301II] Moving Coil Cartridge
- Type: Moving coil (MC)
- Output: 0.4 mV
- Channel Balance: 1dB Max. (1kHz)
- Channel Separation: 28 dB Min. (1 kHz)
- Output Impedance: 33 ohms
- Suggested Loading: 100 ohms min.
- Stylus: 0.07 x 0.14 mm special elliptical tip
- Frequency Range: 20 Hz to 60 kHz
- Tracking Force: 1.4g ± 0.2g (1.2~1.6g)
- Compliance 13 x 10-6 cm/dyne
- Weight (Mass): 6.0g
|
|
MSRP $249.00
|
|
[DL-102] Mono High Output Moving Coil Cartridge
- Type: Moving coil (MC)
- Output: 3.0 mV
- Output Impedance: 240 ohms
- Suggested Loading: 47K ohms
- Stylus: 0.017 mm round tip
- Frequency Range: 50 Hz to 10 kHz
- Tracking Force: 3.0g ± 1.0g (2.0~4.0g)
- Weight (Mass): 13.0g
|
|
MSRP $229.00
|
|
[DL-103] Moving Coil Cartridge
- Type: Moving coil (MC)
- Output: 0.3 mV
- Channel Balance: 1dB Max. (1kHz)
- Channel Separation: 25 dB Min. (1 kHz)
- Output Impedance: 40 ohms
- Suggested Loading: 100 ohms min.
- Stylus: 16.5 Micron round tip
- Frequency Range: 20 Hz to 45 kHz
- Tracking Force: 2.5g ± 0.2g (2.3~2.7g)
- Compliance 5 x 10-6 cm/dyne
- Weight (Mass): 8.5g
|
|
MSRP $179.00
|
|
[DL-160] High Output Moving Coil Cartridge
- Type: Moving coil (MC)
- Output: 1.6 mV high output designed for MM inputs
- Channel Balance: 1dB Max. (1kHz)
- Channel Separation: 25 dB Min. (1 kHz)
- Output Impedance: 160 ohms
- Suggested loading: 47K ohms
- Stylus: 0.07 x 0.14 mm special elliptical solid diamond
- Cantilever: Aluminum
- Frequency Range: 20 Hz to 50 kHz
- Tracking Force: 1.6g ± 0.3g (1.3~1.9g)
- Compliance 10 x 10-6 cm/dyne
- Weight (Mass): 4.8g
|
|
MSRP $139.00
|
|
[DL-110] High Output Moving Coil Cartridge
- Type: Moving coil (MC)
- Output: 1.6 mV high output designed for MM inputs
- Channel Balance: 1dB Max. (1kHz)
- Channel Separation: 25 dB Min. (1 kHz)
- Output Impedance: 160 ohms
- Suggested Loading: 47K ohms
- Stylus: 0.1 x 0.2 mm special elliptical solid diamond
- Cantilever: Aluminum
- Frequency Range: 20 Hz to 45 kHz
- Tracking Force: 1.8g ± 0.3g (1.5~2.1g)
- Compliance 8 x 10-6 cm/dyne
- Weight (Mass): 4.8g
|
|
MSRP $399.00
|
|
[ASF-S07] Premium Floorstanding Speaker Stands
Designed for the S-101/102 and S-301/302 entertainment systems.
|
|
MSRP $199.00
|
|
[ASF-S05] Premium Table Top/Shelf Speaker Stands
Designed for the S-101/102 and S-301/302 entertainment systems.
|
|
MSRP $300.00
|
|
[ASF-S01S] Speaker Stands
Custom wood speaker stands for the S-101 and S301 models.
|
